• Invention patent

    Invention patent

    Invention patent
  • Second Prize for Outstanding Scientific and Technological Achievements of China Plastic Processing Industry Association

    Second Prize for Outstanding Scientific and Technological Achievements of China Plastic Processing Industry Association

    Second Prize for Outstanding Scientific and Technological Achievements of China Plastic Processing Industry Association
  • Invention patent

    Invention patent

    Invention patent
  • Shandong Tianhe Plastic Co., Ltd.

      In 2008, a long-lasting drip coating film was developed. In 2009, the product obtained a national patent. In 2010, it was listed as a key industry technology innovation and industrialization project by the National Development and Reform Commission. A great revolution in China, created the fifth generation of new agricultural film in China.

    Shandong Tianhe Plastic Co., Ltd.

    ◆ National Light Industry Outstanding Performance Advanced Enterprises
    ◆ China Polyethylene Geomembrane Production and Export Base
    ◆ China Plastics Industry Advanced Unit
    ◆ China Agricultural Film Industry Excellent Brand
    ◆ Shandong Enterprise Technology Center

    ◆ The 12th Five-Year National Science and Technology Support Plan Project

    ◆ Shandong Province Key R&D Plan Major Scientific and Technological Innovation Project

    ◆ First prize Shandong Province Science and Technology Progress

    ◆ Shandong Province Leading Enterprises
    ◆ Shandong Plastics Industry Important Enterprises
    ◆ Provincial Civilized Unit
    ◆ The 11th Five-Year National International Science and Technology Cooperation Program

    ◆ The 13th Five-Year National Key R&D Plan Project

    ◆ Second prize of Science and Technology Invention of China Light Industry Federation

    ◆ Second prize of Excellent Scientific and Technological Achievements of China Plastics Processing Industry Association

    Shandong Tianhe Plastic Co., Ltd.

    PRODUCTS

    Shandong Tianhe Plastic Co., Ltd.

    PO film

     

    High heat preservation, high light transmission, dimming and dustproof, longevity, dripping, fog elimination and other functions.

    Functional agricultural film

     

    High light transmission, longevity, dripping and other functions.

    Shandong Tianhe Plastic Co., Ltd.
    Shandong Tianhe Plastic Co., Ltd.

    Mulch

     

    Water retention, moisture retention, moisturizing, inhibition of weed growth.

    Packaging film

     

    Excellent mechanical properties, high heat-sealing strength, good impact resistance and rub resistance.

    Shandong Tianhe Plastic Co., Ltd.
    Shandong Tianhe Plastic Co., Ltd.

    Geomembrane

     

    High barrier, high strength, high temperature resistance, low temperature resistance, oxidation resistance, environmental stress resistance, the first anti-seepage material for environmental protection and water conservancy projects.

    Geosynthetics

     

    High-density polyethylene geomembrane and related products of geotechnical materials.

    Shandong Tianhe Plastic Co., Ltd.

    NEWS

    2022

    08 -06

    As a film blowing manufacturer, it is a common phenomenon to change the film formula and produce films of different specifications. In this process, various emergencies and on-site film blowing lead to quality problems due to various reasons. By collecting the most common faults and causes in the film blowing process, New Tianhe Plastics proposes the following points to solve production problems. 1. The film is too sticky and has poor opening 1. The type of resin raw material is wrong, it is not a film-blown low-density polyethylene resin, which does not contain an opening agent or the content of the opening agent is low; 2. The temperature of the molten resin is too high and the fluidity is too large; 3. The inflation ratio is too large, resulting in poor opening of the film; 4. The cooling speed is too slow, the film cooling is insufficient, and mutual bonding occurs under the action of the traction roller pressure; 5. The traction speed is too fast. Second, the film transparency is poor 1. The extrusion temperature is low and the resin plasticization is poor, resulting in poor transparency of the blown film; 2. The inflation ratio is too small; 3. The cooling effect is not good, which affects the transparency of the film; 4. The moisture content in the resin raw material is too large; 5. The traction speed is too fast and the film cooling is insufficient. 3. The film is wrinkled 1. The thickness of the film is uneven; 2. The cooling effect is not enough; 3. The inflation ratio is too large, causing the film bubble to be unstable, swinging back and forth from side to side, and prone to wrinkles; 4. The angle of the splint is too large, and the film bubble is flattened in a short distance, so the film is also prone to wrinkles; 5. The pressure on both sides of the traction roller is inconsistent, one side is high and the other is low; 6. The axes between the guide rollers are not parallel, which affects the stability and flatness of the film, resulting in wrinkles. 4. The film has fog-like water marks 1. The extrusion temperature is low and the resin plasticization is poor; 2. The resin is damp and the moisture content is too high. Fifth, the film thickness is not uniform 1. The uniformity of the die gap directly affects the uniformity of the film thickness. If the die gap is not uniform, some parts have larger gaps and some parts have smaller gaps, resulting in more or less extrusion. The thickness of the formed film is also inconsistent, some parts are thin, and some parts are thick; 2. The temperature distribution of the die mouth is uneven, with high and low, so that the thickness of the film after blowing is uneven; 3. The air supply around the cooling air ring is inconsistent, resulting in uneven cooling effect and uneven thickness of the film; 4. Inappropriate inflation ratio and traction ratio make it difficult to control the thickness of the film bubble; 5. The traction speed is not constant and changes constantly, which will of course affect the thickness of the film. Sixth, the thickness of the film is thick 1. The die gap and extrusion volume are too large, so the film thickness is too thick; 2. The air volume of the cooling air ring is too large, and the film is cooled too fast; 3. The traction speed is too slow. 7. Thin film thickness 1. The die gap is too small and the resistance is too large, so the film thickness is too thin; 2. The air volume of the cooling air ring is too small, and the film cooling is too slow; 3. The traction speed is too fast, the film is stretched too much, and the thickness becomes thinner. 8. Poor heat sealability of the film 1. The frost line is too low, and the polymer molecules are oriented, so that the performance of the film is close to that of the oriented film, resulting in a decrease in heat sealing performance; 2. If the inflation ratio and the traction ratio are too large, the film will be stretched and oriented, thus affecting the heat sealing performance of the film; Nine, film longitudinal tensile strength is poor 1. The temperature of the molten resin is too high, which will reduce the longitudinal tensile strength of the film; 2. The inflation ratio is too large and does not match the traction ratio, so that the orientation effect and tensile strength of the film in the transverse direction are improved, while the tensile strength in the longitudinal direction will be deteriorated; 3. The cooling rate of the film is too fast; 4. The pulling speed is slow, and the orientation of the film in the longitudinal direction is not enough, so that the longitudinal tensile strength is deteriorated. 10. The transverse tensile strength of the film is poor 1. The cooling speed of the cooling air ring is too slow; 2. The traction speed is too fast, and the difference with the inflation ratio is too large, which will cause fibrillation in the longitudinal direction, and the transverse strength will be deteriorated. Ele

    2022

    07 -26

    On June 29, 2022, the Provincial Department of Science and Technology organized experts to discuss the "Green and Efficient" project of "Green and Efficient" for the 2017 Taishan Industry Leading Talent Project High-efficiency Ecological Agriculture Innovation Project jointly undertaken by Shandong Xintianhe Plastic Co., Ltd. and Shandong Agricultural University with Mi Qinghua as a leading talent.

    2022

    07 -26

    In March 2021, the on-site acceptance of subject 4 "low-cost manufacturing and industrialization of 10,000-ton long-acting and long-life agricultural shed film" led by Shandong Agricultural University and jointly undertaken by Shandong Xintianhe Plastic Co., Ltd. was launched in Shandong Xintianhe.

    2022

    02 -24

    Now, with the popularization of greenhouse planting technology and my country's support for agricultural vegetable greenhouses,

    Shandong Xintianhe Plastic Co., Ltd. 

      Shandong Xintianhe Plastic Co., Ltd. was established in 1999 with a registered capital of 55.87 million yuan. The company covers an area of more than 50 acres, has 128 employees and more than 60 technicians. It is a large domestic plastic product processing enterprise. The company is now China Plastics Processing The director unit of the Industrial Association, the director unit of the Agricultural Film Special Committee of the China Plastics Processing Industry Association, the director of the Agricultural Plastic Products Branch of the China Plastics Application Technology Society, the key production enterprise in the plastics industry in Shandong Province, and the vice president of the Shandong Agricultural Plastic Engineering Society.

    • 1999

      year

      Company establishment

    • 50

      mu

      Floor space

    • 128

      +

      Existing staff

    • 55.87

      million yuan

      Total assets

    <<More>>

    services available world-wide

    Shandong New Tianhe Plastic Co., Ltd.

    NORTH AMERICA

    EUROPE

    ASIA PACIFIC

    South AMERICA

    Oceania

    Shandong New Tianhe Plastic Co., Ltd.

    CHINA SHANDONG

    Contact us

    Address:

    No. 196, Weisi Road, Qilu Chemical Industrial Park, Linzi, Zibo City, Shandong Province

    Agricultural Film Sales Hotline:

    +86-533-7126666

    Geomembrane Sales Hotline:

    +86-533-7119206

    Телефон для рынок России и Средней Азии+86 13853382929 Володя

    Fax:+86-533-7118318

    E-mail:tianhe@tianhesd.com

    Shandong Tianhe Plastic Co., Ltd.

    Scan the code to contact immediately

    Webpage Copyright© 2022 Shandong New Tianhe Plastic Co., Ltd. Copyright  国际站建设:中企动力 淄博  外贸谷歌推广